1.1 Product Overview
This product is customized to meet customer requirements. This product is a unmanaged commercial grade Ethernet switch, supports 5 Gigabit Ethernet ports, Ethernet port pin way. Support 1 DC 9 ~ 15VDC power input. Support LED lights out of the mouth, 5 LINK lights, 5 R / W lights, power lights.
1.2 Basic Features
※ Support IEEE802.3, 802.3u, 802.3ab, 802.3x standard
※ Supports five 10Base-T / 100Base-T (X) / 1000Base-T (X) Ethernet Gigabit RJ45 ports
※ Support full / half duplex mode, MDI / MDI-X automatic detection
※ Support full wire-speed forwarding non-blocking communication
※ Support 9 ~ 18VDC power input
※ Version of the sub-layout is small, square, 78X78MM
※ There are four holes in the corner, the positioning hole is appropriate circumstances, recommended hole diameter 3.5mm.
※ The module is labeled MS5GSMON V1.0
※ Resistance capacitors use industrial solid-state capacitors.
Chapter 2 Specifications
2.1 Size 78X78MM
2.2 Communication interface
1) Gigabit Ethernet interface
Interface type: 8 pin, support MDI / MDI-X adaptive, PIN Socket can be foolproof with the lock, so as not to shake off.
Transmission distance: Unshielded twisted pair (UTP) or shielded twisted pair (STP), 1000Mbps, connecting with super-5 and class-6 cable of 120Ω, transmission distance up to 100m.
2) Power Interface
Interface type: PH type, two 3.96MM pitch terminals. PIN Socket can be foolproof with the lock, so as not to shake off
3) All the above interfaces are flat inserted as the direction of the diagram, making the sub-wiring can be thin.
4) The lights use SMD up lights to connect lights 1x5, speed lights 1x 5 (from left to right order 12345).
5) Connect the signal to another 5x2 2.0 pitch row PIN.
6) The speed signal is connected to the 5x2 2.0 Pitch PIN.
7) The power supply signal is connected with 1x2 1.5 pitch PIN.
2.3 Indicators
Indicator light
|
LED
|
Indicates status
|
Description of working status
|
Power Indicator
|
PWR
(red)
|
ON
|
Indicating that the power supply is normal;
|
OFF
|
Indicates that the power supply has no power or is operating abnormally.
|
SMT LED, yellow for the port speed indicator, green light for the port link status indicator.
|
Ethernet interface connection indicator (1 ~ 5)
|
LINK/ACK
(green)
|
ON
|
It indicates that the physical port of the switch has a connection;
|
Flash
|
It indicates that the physical port of the switch has data activity.
|
OFF
|
It indicates that the physical port of the switch has no connection.
|
Ethernet interface speed indicator (1 ~ 5)
|
1000M/
100M/
10M
(yellow)
|
ON
|
1000M working mode
|
Flash
|
100M working mode
|
OFF
|
10M working mode
|
2.4 Power supply
Item
|
Description
|
Note
|
Switch rated input voltage
|
9~15VDC
|
/
|
2.5 working environment
Item
|
The range of requirements
|
Remarks
|
Working temperature
|
-10℃~60℃
|
/
|
Storage temperature
|
-40℃~85℃
|
/
|
Working humidity
|
5%~95%
|
No condensation
|